Keepass and Ubuntu

Regarding my last recommendation for Ubuntu and Keepass, there is now a much simpler option: a ppa-repository. Installation now only requires 3 commands, and no fiddling with setting up a script to launch the .exe-file with mono.


sudo apt-add-repository ppa:jtaylor/keepass
sudo apt-get update
sudo apt-get install keepass2


Alt+F2, “keepass2″ & Enter, and be on your way. In my experience, this also much more stable than running Keepass with mono. This is quite old news and more accessible than my last post on the matter, as this information is linked to from the main Keepass site.

Tags: ubuntu

Suspend problem in Ubuntu 10.10 on ASUS N73JF (and others)

Update 26th August 2011: Solution tested and working with Debian Squeeze (my new main distro). A commenter reported it works on Mint, so I guess it works on most Debian-based distros. Another commenter had success on a Gigabyte motherboard, which is very interesting indeed.

After 3.5 years I finally caved in and got a new laptop. Screen resolution, lagging editors and general sloppyness where the major factors for ditching the old one. I have been quite pleased with the quality on my ASUS eeePC 1015PE, so I decided to go for another ASUS computer. As I am to use this machine for development, I’d like to have a large screen; the old one left me frustrated at the lack of screen estate and the crappy resolution. I therefore got me a 17,3″ ASUS N73JF, with enough power to last me just as long as the old one, I hope!

Since the new laptop has a somewhat decent graphics card, I decided to let the Windows install it came with stay, to be used for games and the likes. I of course installed Ubuntu 10.10 64-bit right away after booting the laptop to Windows 7 to check it out. It took longer booting to the preinstalled Windows 7, than it took installing Ubuntu from scratch! In addition to this, the Windows install was defiled with crapware. No wonder people buy Macs. Enough rambling; over to the problem at hand.

I did encounter a problem with getting the Suspend working in Ubuntu. After checking the fantastic ubuntuforums.org, I found people with similar issues. This thread holds the answers, but it seems the fix is more technical than it should be. However it will probably get included in some patch in the future.

At least for the N73JF, you need to create two files.

sudo touch /etc/pm/sleep.d/20_custom-ehci_hcd
sudo touch /etc/pm/sleep.d/20_custom-xhci_hcd

To open a GUI editor like gedit, with root privileges, you can use the following command:

gksudo gedit

Keep in mind this is dangerous if you edit the wrong files, so only open the ones we created with the touch-command. If you want to open the file directly, you can append the path to the filename onto the gedit command like so:

gksudo gedit /etc/pm/sleep.d/20_custom-ehci_hcd

When you have opened the files in your favorite editor, we need to enter some scripts. In 20_custom-ehci-hcd put in:

#!/bin/sh
# File: "/etc/pm/sleep.d/20_custom-ehci_hcd".
TMPLIST=/tmp/ehci-dev-list

case "${1}" in
        hibernate|suspend)
    echo -n '' > $TMPLIST
          for i in `ls /sys/bus/pci/drivers/ehci_hcd/ | egrep '[0-9a-z]+\:[0-9a-z]+\:.*$'`; do
              # Unbind ehci_hcd for first device XXXX:XX:XX.X:
               echo -n "$i" | tee /sys/bus/pci/drivers/ehci_hcd/unbind
           echo "$i" >> $TMPLIST
          done
        ;;
        resume|thaw)
    for i in `cat $TMPLIST`; do
              # Bind ehci_hcd for first device XXXX:XX:XX.X:
              echo -n "$i" | tee /sys/bus/pci/drivers/ehci_hcd/bind
    done
    rm $TMPLIST
        ;;
esac

In 20_custom-xhci_hcd put in:

#!/bin/sh
# File: "/etc/pm/sleep.d/20_custom-xhci_hcd".
TMPLIST=/tmp/xhci-dev-list

case "${1}" in
        hibernate|suspend)
    echo -n '' > $TMPLIST
          for i in `ls /sys/bus/pci/drivers/xhci_hcd/ | egrep '[0-9a-z]+\:[0-9a-z]+\:.*$'`; do
              # Unbind ehci_hcd for first device XXXX:XX:XX.X:
               echo -n "$i" | tee /sys/bus/pci/drivers/xhci_hcd/unbind
           echo "$i" >> $TMPLIST
          done
        ;;
        resume|thaw)
    for i in `cat $TMPLIST`; do
              # Bind ehci_hcd for first device XXXX:XX:XX.X:
              echo -n "$i" | tee /sys/bus/pci/drivers/xhci_hcd/bind
    done
    rm $TMPLIST
        ;;
esac

Now you must make these files executable with these two commands:

chmod +x /etc/pm/sleep.d/20_custom-ehci_hcd
chmod +x /etc/pm/sleep.d/20_custom-xhci_hcd

A user on the forum reported he didn’t need the extra file as proposed in the first solution. I did not test without this file, as it wasn’t working until I added the xhci-related file. I suggest you try the steps outlined here first, and attempt these last steps only if it doesn’t work.

Make this file:

sudo touch /etc/pm/config.d/usb3-suspend-workaround

Open the file, and put this in:

#File: "/etc/pm/config.d/usb3-suspend-workaround".
SUSPEND_MODULES="xhci"

He didn’t say if it needs to be executable, I’m assuming it should and that it couldn’t hurt:

chmod +x /etc/pm/config.d/usb3-suspend-workaround

I hope you get it working You should also check out the source for this post, as pointed out earlier. The forum might contain new information, after this is published.

Tags: computers, debian, instructions, ubuntu

Keepass and Ubuntu 10.10

There is a issue with KeePass in Ubuntu 10.10. As I had to fix this on several computers, I am posting the solution here. It was somewhat inconvenient to track down.

Run this command in the terminal:

sudo apt-get install libmono-winforms2.0-cil libmono-system-runtime2.0-cil


Earlier you only needed to install the winforms package to run KeePass, but with Ubuntu 10.10 it seems you need the system-runtime as well.

Tags: ubuntu